Many people attempt to do their own plumbing in order to save money on repair costs. They often fail due to a lack of proper plumbing knowledge or by using the wrong tools for the job. If you would like to do your own plumbing without doing more harm than good, then read the tips in the following article.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.
Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make more info if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.
Ensure that a septic tank is emptied approximately five yearly, and make sure it is properly maintained. This will keep sediment from hanging out in your tank and eventually causing there to be a backup in your home. Hiring a professional to pump out your septic tank is costly, but it is far preferable to the damages that could be incurred if the tank becomes backed-up or inoperative.
In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.
If you want to add some water pressure to the shower or any spigot in the home, make sure you clean out the aerator. A small brush (an old toothbrush is ideal) dipped in vinegar will do a great job on the aerator after it's been removed and disassembled. Then all you need to do is rinse and reassemble the aerator before putting it back on the faucet. Remove the sediment from the aerator to increase water pressure.
If you find yourself needing a plumber, don't hire one until you have checked out his or her credentials. Some plumbers are not experienced enough or skilled enough to handle some jobs, and they can worsen your problem. Make sure to look at any online reviews, or ask for a referral from a friend or family member.
Governmental regulations sometimes prevent plumbers from actively providing maintenance to copper piping. If you have a calcium buildup in your copper piping, you are going to need to take care of this yourself. You have to get rid of all the water and add vinegar which eats away the calcium buildup out of copper pipes.
If you have an ice maker or other plumbing going to your refrigerator, every six months or so pull the refrigerator away from the wall and inspect this plumbing. There should be no condensation or corrosion on these plumbing lines, if there is, contact a plumber and have them look at it.
To prevent hair from clogging your drains, install strainers in each tub and shower to capture the hairs before they can go down the drain. When combined with soap build-up, hair can bring your drains to a complete standstill, so it's important to prevent the hairs from reaching the pipes in the first place.
Make sure to never leave any flammable liquids near your water heater. Certain liquids like gasoline, solvents, or adhesives are flammable, and if left too close to the water heater, can ignite. If you have to have these liquids in your basement, place it far away from your water heater.
If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.
Never pour grease down the kitchen-sink drain. This will help you avoid clogs in your kitchen sink. Place grease in a can or other receptacles and dispose of in the trash. Grease that has congealed on pots, and pans can be wiped off with paper towels that can be thrown in the trash.
Check for calcium and mineral deposits by turning on both the kitchen sink and the bathtub. If the volume of water is low, it may be time for you to replace pipes due to deposits of calcium and other minerals. Check the water pressure and consider calling a professional to handle the entire job.
The most common cause of leakage with compression faucets is the washer. If you have a leak, unscrew the handle and remove the escutcheon with a screwdriver. Pull the stem and see if the washer is still intact. If it isn't, you know where your problem is.
As you can see, plumbing is not rocket science. All you need to do is to find reliable sources that will give you great tips on addressing plumbing problems. The time you invest in educating yourself on plumbing issues will be time well-spent, because it will save you a lot of money in the long run.
0 
Star